I'm a new pool owner and have a 30k gallon pool in the Dallas Texas area. I have been using the Taylor test kit to check levels for the last 6 months and have used the trouble free app to input levels to find what I need to add. A couple weeks ago I followed the apps advice and added 50lbs of calcium hardness increaser. Since then I have had a hard time getting any FC level in my results (maybe 0.2 FC at most). The FC is also a bit cloudy.
The water is a little milky but not significant. Below is my latest test after adding 2 gallons of 7.1percent bleach (again the apps recommendation) to get to about 5 FC.
I have thought about using the SLAM method but not sure it will help and don't want to waste all the chemicals.
Any tips?
The water is a little milky but not significant. Below is my latest test after adding 2 gallons of 7.1percent bleach (again the apps recommendation) to get to about 5 FC.
I have thought about using the SLAM method but not sure it will help and don't want to waste all the chemicals.
Any tips?