No Cell Power!

[Pepsiman34]

I found a video on YouTube and checked each step. Until it told me my rectifiers needed replaced. So installed new rectifiers. Still no power took my T-15 cell to a buddys house, and it turned right on. I did find a burnt solder on back of board. It was behind a relay. I was wondering how hard it would be to replace? Any help would be appreciated. Pic is of relay that has burnt spot behind it.

 

[mas985]

Most of the time you just need to refloat the solder so it makes a better connection with the trace. Have you ever soldered before?

 

[NeedMoreSun]

I'd re-solder that joint first.

Including the information on what controller you are talking about in your signature or the post would help others that know these systems well though. Otherwise, if you found a bad solder joint and recognized it I'd try re-soldering it before swapping parts.

 

[JamesW]

Typically, resoldering works.

 

[Pepsiman34]

Sorry Aqua Plus with T-15 cell. I have never done any soldering, but I guess I can try that first.