- Jun 5, 2024
- 102
- Pool Size
- 10000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I started the SLAM this morning and I haven't yet managed to get it up to the FC of 24 I am aiming for. But first the before SLAM measurements.
FC = 2.5
CC = 1.5
CYA = presumed to be about 60, tested by the pool store as 22 twice, then added 1 gallon of liquid stabilizer per PoolMath. My CYA test comes in in a couple of days.
PH = 7.4
TA = 90
CH = 280
SALT = 4010
So based on the FC PoolMath suggested 229 oz. of 12% chlorine. I put that in at 8 am with the pump running and SWG off. I came home at noon and the FC was 7.5. Added another 181 oz. and brushed down the pool. Came back at 6 pm and the FC was 12.5 so added another 123 oz and more scrubbing. At 8 pm the FC was 16. Do I add more tonight, keep trying to get to 24? Did the 2 hours between the addition of chlorine and my last measurement allow whatever is lowering the FC. Is this normal?
FC = 2.5
CC = 1.5
CYA = presumed to be about 60, tested by the pool store as 22 twice, then added 1 gallon of liquid stabilizer per PoolMath. My CYA test comes in in a couple of days.
PH = 7.4
TA = 90
CH = 280
SALT = 4010
So based on the FC PoolMath suggested 229 oz. of 12% chlorine. I put that in at 8 am with the pump running and SWG off. I came home at noon and the FC was 7.5. Added another 181 oz. and brushed down the pool. Came back at 6 pm and the FC was 12.5 so added another 123 oz and more scrubbing. At 8 pm the FC was 16. Do I add more tonight, keep trying to get to 24? Did the 2 hours between the addition of chlorine and my last measurement allow whatever is lowering the FC. Is this normal?