Good evening, I've bee reviewing the forums over the last few weeks as we got closer to completing our inground, vinyl liner pool and really appreciate the feedback from the members! Just completed testing with Taylor Complete FAS-DPD Pool Water Test Kit K-2006 with results listed below:
FC -- 0
CC -- .2 ppm
PH -- 7.7
TA -- 60
CH -- 90
CYA -- tester stopped reading at 30, but could still clearly see the bottom of the tester. Little to no cloudiness in test sample.
I recently (30 min ago upped the output on my SWG from 4 of 8 to 7 of 8). I plan to run my pump through the night on med (~ 1900 rpm) to help get my FC levels up. Question, should I use that method or plan to increase FC by utilizing Bleach? Thanks adn look forward to the feedback!!
FC -- 0
CC -- .2 ppm
PH -- 7.7
TA -- 60
CH -- 90
CYA -- tester stopped reading at 30, but could still clearly see the bottom of the tester. Little to no cloudiness in test sample.
I recently (30 min ago upped the output on my SWG from 4 of 8 to 7 of 8). I plan to run my pump through the night on med (~ 1900 rpm) to help get my FC levels up. Question, should I use that method or plan to increase FC by utilizing Bleach? Thanks adn look forward to the feedback!!