This week I noticed some green spots on areas of the pool wall, so I figured I needed to SLAM to get it gone. I had slacked due to work travel, heavy rain, no other problems all summer, I know….---other than some algae spots the pool is clear and looks great. I have been brushing the pool walls and vacuuming last 2 days
Last night I added around 220 oz of 8.25% bleach I got from Home Depot, based on my CYA of 38, should have gotten me to around FC 15
Test this morning
PH- 8.2--8.4, up from 7.5 last evening (I believe this is due to SLAM) Should I reduce this today?
FC- 14 - close to my target
CC .5
TC 14.5
CH 275
TA 90
CYA 38 (I don't adjust this until I have pass the OCLT correct?)
In addition I have been running my SWG on 100%
So I am looking for FC loss overnight tonight (Friday)- questions on this
Do I need to shut off my SWG for accurate comparison? Edit- I will shut it off
Should I run the pool overnight? Edit- I will run it overnight
Do I sample tonight for comparison tomorrow morning? I have to be gone this evening from 5PM- 10PM or so- best sample at 10PM? Edit - I will do the test tonight around 10 and again in the AM around 7
Tomorrow morning I am looking for no more than 1 of FC, < 0.5 in CC, correct?
Thanks in advance
FYI I got the TF-100 test kit over the summer, this is what I have been using for testing.
Last night I added around 220 oz of 8.25% bleach I got from Home Depot, based on my CYA of 38, should have gotten me to around FC 15
Test this morning
PH- 8.2--8.4, up from 7.5 last evening (I believe this is due to SLAM) Should I reduce this today?
FC- 14 - close to my target
CC .5
TC 14.5
CH 275
TA 90
CYA 38 (I don't adjust this until I have pass the OCLT correct?)
In addition I have been running my SWG on 100%
So I am looking for FC loss overnight tonight (Friday)- questions on this
Do I need to shut off my SWG for accurate comparison? Edit- I will shut it off
Should I run the pool overnight? Edit- I will run it overnight
Do I sample tonight for comparison tomorrow morning? I have to be gone this evening from 5PM- 10PM or so- best sample at 10PM? Edit - I will do the test tonight around 10 and again in the AM around 7
Tomorrow morning I am looking for no more than 1 of FC, < 0.5 in CC, correct?
Thanks in advance
FYI I got the TF-100 test kit over the summer, this is what I have been using for testing.