Let the FC drift down back to target range. (Cell off).So turn my SWG back on? And turn it to 100%?
Then set the cell to produce your recent daily loss. Start with 4ppm if you don't know it, and dial it down as needed.
4 hours is 1 ppm and you can math that with runtime and % however you wish.
100% for 6 hours = 50% for 12 hours = 25% for 24 hours = 1.5 ppm. Etc etc etc. You'll generally need more runtime/ % with a low output cell.
Test the salt and report back.Do I need to test salt first, and add enough salt accordingly?
The CYA should be the same it was but wouldn't hurt to get another practice test in.Do I need to test pH and CYA now that SLAM is complete?
Ph is invalid at 10+ FC, so that has to wait.
Last edited: