Hi All,
I have an EasyTouch Panel circa 2010. The 8 channel remote died so I purchased a new kit (receiver and remote) on Amazon that was open box (returned by customer). I've followed the connection instructions and it never pairs with the receiver. I noticed on the new receiver that the power led is lit, but the 485 Link led never lights up. On the old receiver card the 485 Link led lights up within seconds of powering the system on. I'm wondering if someone pulled a fast one on Amazon and returned a faulty card or if there is an incompatibility between the new receiver card and the main panel.
Main Panel
Version 2080
Software Ver: 2.080
Bootloader Ver: 1.010
Receiver Card
PN: 520949
Ver: 2040
Any help would be greatly appreciated.
Thanks
Bob
I have an EasyTouch Panel circa 2010. The 8 channel remote died so I purchased a new kit (receiver and remote) on Amazon that was open box (returned by customer). I've followed the connection instructions and it never pairs with the receiver. I noticed on the new receiver that the power led is lit, but the 485 Link led never lights up. On the old receiver card the 485 Link led lights up within seconds of powering the system on. I'm wondering if someone pulled a fast one on Amazon and returned a faulty card or if there is an incompatibility between the new receiver card and the main panel.
Main Panel
Version 2080
Software Ver: 2.080
Bootloader Ver: 1.010
Receiver Card
PN: 520949
Ver: 2040
Any help would be greatly appreciated.
Thanks
Bob