Water looked slightly cloudy as I rolled back the pool cover (which has been on for last 2-3 days straight) so I did my first water test.
I just got the Taylor k2006 kit and results were as follows:
FC 0-0.1
pH 7.8
CYA 30 (to be honest I never saw the black dot disappear)
I added a gallon of 10% liquid chlorine and 1 gallon of MA.
Question I have is; it seems my pH will drop to around 7.2 day after adding MA but within a week it’s climbed to 7.8 and wants to go higher.
Also, I have no SWG, just a chlorinater? (Where you can add pucks to the plumbing I believe is the return line). I also purchased (again before reading pool school) a bucket of tri-chlor tabs and was thinking it would be ok to use some as my CYA seems to be pretty low.
I have ozone, (I read pool school I know) and we do have 3 shear decent waterfalls.
Any tips?
I just got the Taylor k2006 kit and results were as follows:
FC 0-0.1
pH 7.8
CYA 30 (to be honest I never saw the black dot disappear)
I added a gallon of 10% liquid chlorine and 1 gallon of MA.
Question I have is; it seems my pH will drop to around 7.2 day after adding MA but within a week it’s climbed to 7.8 and wants to go higher.
Also, I have no SWG, just a chlorinater? (Where you can add pucks to the plumbing I believe is the return line). I also purchased (again before reading pool school) a bucket of tri-chlor tabs and was thinking it would be ok to use some as my CYA seems to be pretty low.
I have ozone, (I read pool school I know) and we do have 3 shear decent waterfalls.
Any tips?