Hi Everyone! I've been reading this forum all summer since we installed our 15x24 above ground pool a few months ago. All was going well until we got back today from 2 weeks away. I kind of expected to see some issues after being gone for so long. But we have a swg so I had someone come over every other day to clear out the skimmer and that was all the attention our pool got for the past 2 weeks. Today, the water is a slight tinge of green, but I'm not sure just how bad it is considering it's our first water quality issue. I checked all of the levels with the TF-100 kit:
FC: 5.5
CC: 0.5
PH: 7.8
TA: 100
CH: 125
CYA: 60
Salt: 3060
We did get a lot of rain at various times, and the pool is very full. About an inch from the top of the skimmer. I guess my question is do I need to SLAM, and if so is there anything I need to correct based on my current numbers besides bringing up the FC? Pics attached. Thanks for your help!!
FC: 5.5
CC: 0.5
PH: 7.8
TA: 100
CH: 125
CYA: 60
Salt: 3060
We did get a lot of rain at various times, and the pool is very full. About an inch from the top of the skimmer. I guess my question is do I need to SLAM, and if so is there anything I need to correct based on my current numbers besides bringing up the FC? Pics attached. Thanks for your help!!