My pool was filled for the first time at the start of August and the builder did maintenance for the first two months. I never intended for them to handle maintenance long term, but it was still pretty underwhelming. Salt was added sporadically and maintenance didn't seem to be on the same page with the project manager at any point. Oh, and about a month into it I had algae.
Fast forward to this morning and I used my test kit for the first time. Pool Math appears to want me to record my results and "correct" things at the same time, but I don't own an chemicals at this point.
Results:
Salt: 2800 (my Hayward app shows my set point is at 70%, average salt is 3596ppm and instant salt is 3161ppm.)
ph: 8.2 (might be higher than that. It's deeper red than the chart.)
cl: 31.5
calcium: 400
TA: 80
CYA: 55
Pool details are (hopefully) in my forum signature.
Looking for help with my shopping list to start.
Thank you
Fast forward to this morning and I used my test kit for the first time. Pool Math appears to want me to record my results and "correct" things at the same time, but I don't own an chemicals at this point.
Results:
Salt: 2800 (my Hayward app shows my set point is at 70%, average salt is 3596ppm and instant salt is 3161ppm.)
ph: 8.2 (might be higher than that. It's deeper red than the chart.)
cl: 31.5
calcium: 400
TA: 80
CYA: 55
Pool details are (hopefully) in my forum signature.
Looking for help with my shopping list to start.
Thank you