I'm looking for a little advice. We're having our liner replaced for the first time since we bought the house. The entire liner is pretty much wrinkle free and has seated nicely, except in one corner. It's probably hard to tell from the attached picture but where the liner goes into the corner on both sides, it's off the pool wall about 3 1/2". In the center of the corner it's off the wall about 2". You can also kind of tell in the picture the seam in the center of the corner on the floor is away from the corner. I realize the weight of the water pushes the liner against the wall when it's full, but that seems like it should not be that far off the wall. I was hoping to get some thoughts from people with more experience as this is my first pool.