New Install Leak - Circupool RJ30+ - at Flow sensor

[ddigz]

So I just installed a new pump, filter, and rj30+ swg and did all hard plumbing. Everything seems to be good, except there is a minor leak on my flow sensor. I used the included reducer to 1 1/2" and I believe it's leaking on one of the sides between the reducer and the PVC pipe.

Am I screwed?

It's leaking pretty much a drop every 10 seconds right now.

Very frustrating.

 

[ddigz]

Any idea if there's any way to fix this leak without cutting it out, and getting a new flow sensor?

 

[Hootz]

A drop every 10 seconds is not a significant leak. You may be able to use an epoxy to seal the leak from the outside. If that does not work you will have to replace the affected plumbing.