Really enjoyed the pool this weekend!
- used robot for the first time, did great
- learned that my SWG and heat pump like a minimum of 2700 RPM on the pump to register the correct amount of salt and for the minimum pressure on the heat pump. I may need to add an intermatic timer to SWG if I decide to only run it during one of two cycles. Need to see if that is a DIY project
- tf100 kit is awesome! the important numbers are mostly dialed in, hovering around 5 ppm of FC, I’m slowly turning the SWG down to try to get it to 3 or 4 PPM, think I’m around 40% currently. CYA around 70 after 7 pounds of stabilizer. PH was around 8.2 but has dropped to 7.5 after a few days, don’t need to add acid
- some concrete stains on white coping, need to figure out how to clean them off