Hi guys! New to the pool world and can't figure out why pool us not working. Help!! This is the first time I'm opening a pool. I have a Jandy pool equipment with phpm 1.5 pump. Pool was winterized. I removed the plugs from the side of the pool and from both skimmers (5 total). Then filled pool above halfway point of skimmer, then retrieved the plugs that was inside pump, screwed both into the pump, primed the pump by using hose for about 4 minutes; opened both skimmer and main valves. Turned on pump and it suck out the water and currently in it and no water is being sucked from the pool. Nothing coming out of both pool skimmers or jets. The push pull filter is in filter mode, but I can't get the handle down to lock it in place because it's too tight. Also checked both skimmers and pump basket and impeller for debris which there was none. Any help will be greatly appreciated.