Well, we settled on a builder and design so this will be the official thread for our pool build. The two builders we were down to each had designs we liked, had good reputations in the area but we opted for the builder we choose based on liking this design a little better. The other factors were price and the one we didn’t choose would not install a SWG unless we signed a waiver which played a big part in our decision to not select them. Anyway, here are the general specs for this pool.
Dimensions are 30’x12’ max length and width. Depth is 3.5’ to 6’.
Pump: 2.7 Jandy VS ePump along with .75 waterfall pump
Jandy valves with actuators
Filter: Jandy CL460 cartridge
SWCG: Aquapure PLC1400
Automation: Aqualink PDA-P4
Extra outlets and light at equipment pad
Pool Lights: qty 2 hydrocool led watercolors
1 skimmer
4 returns
Pour-a-lids
Channel drain
2 sleeves for removable hand rail for SR Smith Artisan Handrail
1 umbrella sleeve in Acapulco shelf
Plumb for solar
Wall: 27’ in length 18” high and 12” wide with 3 sheer descents in lengths of 2’, 3’, 2’. The middle one will be slightly higher than the outside ones. Wall will be finished in a rock veneer that matches our house topped with cantilevered cement.
Deck: Salt finished grey natural cement with 1’ wide broom finish coping. We’re having some extra decking/patio poured so the final dimensions will be pending but the price per square foot was established
Waterline tile: NPT 6” Quarry ridge in beige with matching 2” target tiles on steps and swim out bench
Plaster: NPT Quartzscapes Caribbean series in Aruba Sky
Their pricing includes a MX6 vacuum but at some point we will probably get a robot.
They will make sure the pool is fully balanced and ensure all equipment is fully functional. They do a pool school to ensure we know how to use the equipment, etc. One of the things this company is known for is their customer service and ongoing support of the pool owner once the job is completed.
Due to our schedule the construction is targeted to begin the end of Sept with completion within 60 workable days. Since I’ll be home I’ll make sure to take plenty of pictures and post them here.
Mark
Dimensions are 30’x12’ max length and width. Depth is 3.5’ to 6’.
Pump: 2.7 Jandy VS ePump along with .75 waterfall pump
Jandy valves with actuators
Filter: Jandy CL460 cartridge
SWCG: Aquapure PLC1400
Automation: Aqualink PDA-P4
Extra outlets and light at equipment pad
Pool Lights: qty 2 hydrocool led watercolors
1 skimmer
4 returns
Pour-a-lids
Channel drain
2 sleeves for removable hand rail for SR Smith Artisan Handrail
1 umbrella sleeve in Acapulco shelf
Plumb for solar
Wall: 27’ in length 18” high and 12” wide with 3 sheer descents in lengths of 2’, 3’, 2’. The middle one will be slightly higher than the outside ones. Wall will be finished in a rock veneer that matches our house topped with cantilevered cement.
Deck: Salt finished grey natural cement with 1’ wide broom finish coping. We’re having some extra decking/patio poured so the final dimensions will be pending but the price per square foot was established
Waterline tile: NPT 6” Quarry ridge in beige with matching 2” target tiles on steps and swim out bench
Plaster: NPT Quartzscapes Caribbean series in Aruba Sky
Their pricing includes a MX6 vacuum but at some point we will probably get a robot.
They will make sure the pool is fully balanced and ensure all equipment is fully functional. They do a pool school to ensure we know how to use the equipment, etc. One of the things this company is known for is their customer service and ongoing support of the pool owner once the job is completed.
Due to our schedule the construction is targeted to begin the end of Sept with completion within 60 workable days. Since I’ll be home I’ll make sure to take plenty of pictures and post them here.
Mark
Attachments
Last edited: