Hi All,
One of my spa jets got broken - the internal part popped out during spa use. It looks like the little tabs that hold it inside the wall fitting have deteriorated over time and it got pushed out with the water pressure.
I removed the wall fitting that was threaded into the pipe inside the wall (see picture below) and was going to order a new jet, but I wanted to make sure that I am getting all the parts needed. My understanding is that I am going to need a new internal part (diffuser with jet nozzles, etc.), wall fitting and a piece of 1" PVC pipe. I was able to find the internals and wall fitting (circled green) online, but wasn't sure if the fitting comes with the threaded connector (circled in red) or if I need to order it separately. Can someone point me to the right parts I need to order?
As far as I can tell, it is a Poly Storm spa jet.
One of my spa jets got broken - the internal part popped out during spa use. It looks like the little tabs that hold it inside the wall fitting have deteriorated over time and it got pushed out with the water pressure.
I removed the wall fitting that was threaded into the pipe inside the wall (see picture below) and was going to order a new jet, but I wanted to make sure that I am getting all the parts needed. My understanding is that I am going to need a new internal part (diffuser with jet nozzles, etc.), wall fitting and a piece of 1" PVC pipe. I was able to find the internals and wall fitting (circled green) online, but wasn't sure if the fitting comes with the threaded connector (circled in red) or if I need to order it separately. Can someone point me to the right parts I need to order?
As far as I can tell, it is a Poly Storm spa jet.
