Need Help-Getting No Water Flow Timeout FlowSensorhaywardomnilogic

[rosprayb]

My main pool pump will only run for a few minutes before it shuts off due to no water flow error from Omnilogic.
The pump is primed and water is in it.
I backwashed sand filter and clean T Cell.
It will not stay on when freeze protect kicks in on low temperatures also.
I am watching pump and it is running and primed but still shuts off with water moving. No air bubbles.
Pool is full of water.
Spa pump, bubbler pump, and overflow spa water spill works fine. Only main pool pump shuts off.
No leaks at pump.

What can be problem? Sub freezing temperatures are coming in 3 days.

 

[ajw22]

Welcome o TFP.

Show us pics of your equipment pad.

Where is your flow switch located?

Check the flow switch for proper operation.

Maybe replace the flow switch.

 

[fragler]

Disable flow monitoring.

 

[teensl]

Disable flow monitoring.

Could you please explain how to do this? I'm having the same problem.

 

[JamesW]

 

[teensl]

Could you please explain how to do this? I'm having the same problem.

 

[teensl]

View attachment 468836

Thanks for this, you don't by chance have a similar video for a Hayward Omnilogic system? (This is the Prologic).

 

[JamesW]

 

[teensl]

thank you so much James!