My temperature reading is off

[Rick32656]

My Blueworks BLH system is telling me the the water temperature is too high and it is not generating chlorine (also shows -0.00 amps). The water temp is currently 71 degrees.

 

[PoolStored]

HEY!! Welcome to TFP!

I believe that on the BLH, the temperature sensor is in the cell and the BLH will sense and protect high and low temperatures. It is likely an indication that the temp. sensor in the cell has failed. How old is the cell? Is it in the sun or shade?

 

[djdonte]

You will need to contact the manufacturer. Ive never seen a SWG temp sensor that was not integrated in the cell and user serviceable.

 

[Rick32656]

HEY!! Welcome to TFP!

I believe that on the BLH, the temperature sensor is in the cell and the BLH will sense and protect high and low temperatures. It is likely an indication that the temp. sensor in the cell has failed. How old is the cell? Is it in the sun or shade?

Thank you. The cell is less than a year old and is mostly sun.

 

[Rick32656]

HEY!! Welcome to TFP!

I believe that on the BLH, the temperature sensor is in the cell and the BLH will sense and protect high and low temperatures. It is likely an indication that the temp. sensor in the cell has failed. How old is the cell? Is it in the sun or shade?

Thank you. The cell is less than a year old and is mostly sun.

 

[PoolStored]

Thank you. The cell is less than a year old and is mostly sun.

If it is less than 1 year old, I would contact the installer. Likely still under warranty.

 

[Bob Jakob]

Generic Cells are notorious for incorrect temperatures leading to incorrect salt readings.