My Prism Frame Pool does bent?

[TomTom1298]

Howdy! So I’ve been filling my pool since yesterday morning. And after like 2 hours I’ve noticed the pool starting bending inwards.

And now, the pool is 15 cm away from the Max, and the pool is still a bit bending. (See pictures)

Is there anything I can do?

I’ve been googling, but all of them were not clear for me (I’m Dutch)

Picture 1 was yesterday, 20% filled. Picture 2 is now.

 

[bordelond]

That bending is natural, TomTom — don’t worry about it. I have a very similar Intex Prism Frame pool (looks exactly the same, actually) and it still has that little bend in the sides even when it’s filled up.

 

[TomTom1298]

That bending is natural, TomTom — don’t worry about it. I have a very similar Intex Prism Frame pool (looks exactly the same, actually) and it still has that little bend in the sides even when it’s filled up.

Do you have a picture of what your pool looks like + what type of ground is it on?

 

[bordelond]

Now that I’m looking at this photo ... the walls got straighter after a drain & refill a few weeks ago.

But when I first filled the pool two years ago, the sides bent in a bit just like yours. Stayed that all through that recent refill. Not sure why it’s straighter now. Either way, I can tell you from experience that the bending is not a problem.

 

[bordelond]

My pool is on level grass with concrete tiles under the legs.