- Oct 1, 2021
- 1,434
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Mustard algae or pollen?
- Thread starter kul
- Start date
- Oct 1, 2021
- 1,434
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
OCLT test showed loss of 1.
FC last night=14
FC this morning =13
CC=0 both times
What should I do today? Let the chlorine fall and do another OCLT followed by a MA level slam tomorrow?
Pool is clear and beautiful.
FC last night=14
FC this morning =13
CC=0 both times
What should I do today? Let the chlorine fall and do another OCLT followed by a MA level slam tomorrow?
Pool is clear and beautiful.
A 1 FC loss overnight is an acceptable pass and probably likely with organic matter dumping in the pool.
For the sole reason that you've been vigilant with your FC, I'm OK with the borderline pass just this once.
- Oct 1, 2021
- 1,434
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Should I start the MA slam? Or assume this was pollen/dust combo? When I touched the substance it was grainy feeling. Not slimy. It was dirty yellow looking and lined the perimeter of the pool along the tile line. It’s all gone, pump has been running, I hecka cleaned the pool yesterday so not sure what else. I didn’t remove the lights because I don’t know how to open them and if it’s pollen I didn’t want to overreact.
Would another OCLT be helpful?
Would another OCLT be helpful?
I am firmly on team pollen, especially with it lining the tile line.
Hang tight to see if there is anyone on team MA.
- Apr 10, 2018
- 6,390
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
There is a lot of pollen coming down into my pool. When water is calm, it clings to the tile at the waterline. When disturbed, it floats away and dissipates.
I think you're good.
I think you're good.