Hey guys, trying to get my stuff dialed in, could use an assist. Pool H20 is looking good, but some mustard on the sides and in the shadows. I have a SWG but turned it off for winter (in So Cal). I put in about 4 gals of bleach about 3 weeks ago, when I had 0 CH and 0 CC. Last week I added some conditioner (sock method) since I was around 40 or so.
Tested today:
1.5 CL
0 CC
400 CH
150 TA
8.2 PH
60 CYA
I used Pool math, that tells me about 1/2 gallon of acid, and obviously want to get my ph down, CL up. Not much I can do about CH without draining, but our tap water is almost 350, so I think I'll just ignore that for now. Should I go with Muriatic before adding bleach? How long should I wait?
Thanks,
Joel
Tested today:
1.5 CL
0 CC
400 CH
150 TA
8.2 PH
60 CYA
I used Pool math, that tells me about 1/2 gallon of acid, and obviously want to get my ph down, CL up. Not much I can do about CH without draining, but our tap water is almost 350, so I think I'll just ignore that for now. Should I go with Muriatic before adding bleach? How long should I wait?
Thanks,
Joel