Hi. I've been doing my own maintenance and using the TF100 kits and my FC level has been between 4 and 10. 15 days ago was @ 8 using the DPD R-0870 Powder. From there it went to FC of 10 5-days ago.. I had a little DPD R0870 and it was way black so I decided to order a new one. It came today in the mail and re-test today and FC came @ 16. SWG is at the same percent for months (40%). Nothing has changed. I will take all measures on Saturday. I did took PH today and it was above 8 but I read that with FC above 10, measuring PH is not accurate.
We are having chilly weather here down in FL but not sure if my readings are normal for that weather. I also did the the FC/PH test using the K1000 Basic OTO test and the color for the FC was way orange to compare with the yellow I'm suppose to have.
5 days ago my readings were:
FC 10 (With DPD R-0870)
PH 7.8
TA 70
CH 350
CYA 70 (Back in October 5)
I'll be leaving out of town next week for 7-8 days. I'll be taking new readings on Saturday.
Any feedback.
-JJ
We are having chilly weather here down in FL but not sure if my readings are normal for that weather. I also did the the FC/PH test using the K1000 Basic OTO test and the color for the FC was way orange to compare with the yellow I'm suppose to have.
5 days ago my readings were:
FC 10 (With DPD R-0870)
PH 7.8
TA 70
CH 350
CYA 70 (Back in October 5)
I'll be leaving out of town next week for 7-8 days. I'll be taking new readings on Saturday.
Any feedback.
-JJ
Last edited: