- Jul 26, 2020
- 246
- Pool Size
- 23000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I’ve tried multiple Dolphin demo units as well as two Polaris units
@Newdude
the only Dolphin that worked well in my opinion was the M400 (in my pool), it cleared the 4 bottom drains with ease and did a good thoroughly cleaning (but I was NOT a fan of the cartridge system) nor did it do a great job at tile line regardless of handle position.
Got the M600 and wow - by far, hands down the best of any model I’ve tried. It got stuck on main drains yes, but each and every time it worked itself off never requiring me to manually pull it off (took about 30 seconds for it to remove itself) think it used the side jets.
it climbs walls, and the waterline - not even the M400 did this consistent of a job on the waterline and I love the left/right jets that come on to make it move sideways along the waterline
it stayed tight against the wall both going up as well as going down not pulling off and drifting down and did a great job covering all areas of the pool -
yes, a few bells and whistles that you might not need but the function and effectiveness is hands down the best I’ve tested (on my pool)
wanted to share - I have a few video clips but can only upload images

@Newdude
the only Dolphin that worked well in my opinion was the M400 (in my pool), it cleared the 4 bottom drains with ease and did a good thoroughly cleaning (but I was NOT a fan of the cartridge system) nor did it do a great job at tile line regardless of handle position.
Got the M600 and wow - by far, hands down the best of any model I’ve tried. It got stuck on main drains yes, but each and every time it worked itself off never requiring me to manually pull it off (took about 30 seconds for it to remove itself) think it used the side jets.
it climbs walls, and the waterline - not even the M400 did this consistent of a job on the waterline and I love the left/right jets that come on to make it move sideways along the waterline
it stayed tight against the wall both going up as well as going down not pulling off and drifting down and did a great job covering all areas of the pool -
yes, a few bells and whistles that you might not need but the function and effectiveness is hands down the best I’ve tested (on my pool)
wanted to share - I have a few video clips but can only upload images


Last edited: