My M500 is about 4 years old and not climbing well. Th tracks looks a bit worn but are not loose. Since I am changing the climbing rings are there any other parts that I should change out?
M500 needs new climbing rings. Anything else I should replace?
- Thread starter DigitallyChallenged
- Start date
- Jul 21, 2013
- 65,643
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Katodude
Silver Supporter
- Aug 22, 2017
- 3,005
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Check your 3rd brush under the unit. They tend to lose a lot of their teeth. Might be good to replace.
I replaced my brushes, belts and rings on my 5 year old M400. I figured if i was going to take it all apart I would do all three. Works great.
Similar threads
