My pool which was built around 30 years ago and the town has lost half the records from back then. But 6 months ago my contractor took out my old equipment and never noticed or never found a bond wire. He Put in a new patio and all that, placed e- conduit and moved the pool lines to the opposite sideof the pool where I built a new pad. When I went to connect all the new equipment, my electrician said, there no bond wire here.
So my GC came back and found a single wire that was going around the pool and spliced into that and ran it to the new equipment. But I don’t know for sure if everything is connected, and my electrician said there should be two wires that return to the pool pad, not just the one. Any thoughts? Plus it Sounds like I too need to grab the detector and check all the handrails and lights.
So my GC came back and found a single wire that was going around the pool and spliced into that and ran it to the new equipment. But I don’t know for sure if everything is connected, and my electrician said there should be two wires that return to the pool pad, not just the one. Any thoughts? Plus it Sounds like I too need to grab the detector and check all the handrails and lights.