looking for an Eyeball for an old pool ..

[jsano]

hi, i am looking for eyeballs for the return jets. but im not sure which one are compatible with my set up. the inside is 1 1/2 and outter side 3" but it has also 3 small screw holes .
i have attached the pictures.

 

[cowboycasey]

Give inyo a call and you can email those pictures to them.. They are the finding pro's for things like this...

INYO Pools Customer Support - INYOPools.com

Above Ground Pools and Inground Pools Swimming Pool Supplies. Leader in Pool Parts, Swimming Pool Supplies, Swimming Pool Pumps, Pool Pump Motors, and Pool Pump

www.inyopools.com

 

[jsano]

Give inyo a call and you can email those pictures to them.. They are the finding pro's for things like this...

INYO Pools Customer Support - INYOPools.com

Above Ground Pools and Inground Pools Swimming Pool Supplies. Leader in Pool Parts, Swimming Pool Supplies, Swimming Pool Pumps, Pool Pump Motors, and Pool Pump

www.inyopools.com

thank you , these are strange not what i would find on leslies

 

[jsano]

Give inyo a call and you can email those pictures to them.. They are the finding pro's for things like this...

INYO Pools Customer Support - INYOPools.com

Above Ground Pools and Inground Pools Swimming Pool Supplies. Leader in Pool Parts, Swimming Pool Supplies, Swimming Pool Pumps, Pool Pump Motors, and Pool Pump

www.inyopools.com

tried but this is their response lol
"Unfortunately we would need to have these emailed in to do further research. There just enough information to do a quick cross-reference for you"

 

[1poolman1]

The ports with the threaded fittings should be able to use something like a Hayward SP1419D if they are 1.5" threads. For the ones with 3 holes, there used to be grates available but I haven't seen them in about 20 years. You can adapt something like this: Aquastar 4hp101. I don't believe that the 3" model is still around. You will have to drill the pool and install nylon anchors for the mounting plate. I have drilled holes, filled them with epoxy and then pushed in a plastic hollow-wall anchor and then attached the mount plate. Never had a leak, just drill about 1.25". You can use the Aquastar type fittings on all the ports if needed.

​

 

[jsano]

The ports with the threaded fittings should be able to use something like a Hayward SP1419D if they are 1.5" threads. For the ones with 3 holes, there used to be grates available but I haven't seen them in about 20 years. You can adapt something like this: Aquastar 4hp101. I don't believe that the 3" model is still around. You will have to drill the pool and install nylon anchors for the mounting plate. I have drilled holes, filled them with epoxy and then pushed in a plastic hollow-wall anchor and then attached the mount plate. Never had a leak, just drill about 1.25". You can use the Aquastar type fittings on all the ports if needed.

​

i found the original one. they dont sell upgrades for these. ill check those out you mentioned.

 

[cowboycasey]

That is interesting.. Looks like you spin the face and put the screws in 1 and spin it again until all 3 bolts are in... I wonder if someone could use a 3d printer and make a part like that... They have clubs that can do things like that...

I bet a 1/8 inch flat piece of plastic with a 1/2 inch hole in the middle and 3 bolt holes you could make the same thing?? Under 40 bucks and if it works great... I love DIY..

Luckyway 17-Piece Hole Saw Set, 3/4" to 5" Hole Saw with Hole Saw Mandrel for Wood,Plastic,PVC and Drywall: Amazon.com: Tools & Home Improvement

Luckyway 17-Piece Hole Saw Set, 3/4" to 5" Hole Saw with Hole Saw Mandrel for Wood,Plastic,PVC and Drywall: Amazon.com: Tools & Home Improvement

smile.amazon.com

This one may be too thick but maybe it would work??

Amazon.com

smile.amazon.com

Put an O ring between the wall and plate??

232 Buna-N O-Ring, 50A Durometer, Round, Black, 2-3/4" ID, 3" OD, 1/8" Width (Pack of 10): O Ring Seals: Amazon.com: Industrial & Scientific

232 Buna-N O-Ring, 50A Durometer, Round, Black, 2-3/4" ID, 3" OD, 1/8" Width (Pack of 10): O Ring Seals: Amazon.com: Industrial & Scientific

smile.amazon.com