LED Color Changing Lights compatible with Aqualink PDA

[TXpoolDIYguy]

My main pool light went out (spa light is ok but I assume not far behind). Relay is fine, just the light is burned out. It's a Hayward Colorlogic which I have heard are on the low end of quality. I want to be able to continue to change color direct from my PDA. Can I change to a Jandy Watercolors?

I also want to go down to 12V vs 120V for safety reasons. I just need to add a transformer right?

Here is a snapshot of my aqualink/PDA firmware.

 

[ajw22]

What light model choices do you have in your Aqualink PDA Setup?

 

[TXpoolDIYguy]

Looks like I can do Jandy Colors, assuming that's the same as watercolors? What's SAM/SAL light?

 

[ajw22]

Looks like I can do Jandy Colors, assuming that's the same as watercolors?

Yrs, but not Infinite WaterColors lights.

What's SAM/SAL light?

Pentair lights…

Pentair Sam Light 120V 100 Ft Cord - 600017 - INYOPools.com

SAM Light from Pentair

www.inyopools.com

 

[TXpoolDIYguy]

Ok so Watercolors lights are insanely expensive, I can't believe they can get away with that highway robbery. Now I'm looking at the Poolexa LED lights, and will get a separate wifi controller since they use the standard RGB signal. I can have the controller run through the light relay so I can still turn off and on using the PDA.

https://www.amazon.com/gp/product/B09YTFG9PG/ref=ewc_pr_img_1?smid=A1EB0ZSZCJHONO&th=1