Keeping CH at only 200 with CSI balanced ok?

SoDel

Well-known member
May 27, 2022
466
Coastal Sussex Delaware
Pool Size
15000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Hayward Turbo Cell (T-CELL-5)
I guess thread title says it all. Due to pool leak (now fixed), CH gradually fell to 200 (no hard tapwater here, thankfully). Other #’s are TA 60, pH 8.0, CYA 60, and temps in the low 80’s, gives CSI of -0.21 and pH ceiling of 8. I’d like to just leave things there until weather turns cold. Seems should be ok but is there something more to be thinking about? The Poolmath recommendation is CH 250 minimum and I hesitate to deviate from that without asking — is there an important reason for that or is it just a general best practices type recommendation?
 
You can dance on the head of that pin, but you will likely need to add calcium before winter as the CSI goes even more negative with colder water temperatures.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.