Jandy variable speed pump not charging the speed

[FCabarrocas]

I have the Aqualink RS2 control panel,it was connected to a filter pump Jandy FloPro with a two speed relay 832AW-1C-F-C1 and a filter pump relay,now I changed the pump and installed a VSFHP185DV2A with the filter pump relay and the RS485 connection,this pump no need the two speed relay,but the pump doesn’t change the speed.Anyone know how to fix that?
Thanks

 

[FCabarrocas]

I had to install a jumpers between 1-3 and 2-4 in the rs485 connector in the pump in order to make the pump run at 2600 rpm.

 

[ajw22]

Welcome to THP.

What REV level is your Aqualink? You need at least Rev O for VS pump support.

Jandy Aqualink RS - Further Reading

www.troublefreepool.com