- Apr 18, 2024
- 4
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I replaced my Salt Cell - then received Code 124. Followed troubleshooting guidelines which led me to replace the back board in the AP RS controller box.
I bought the used 2022 board off eBay and when I installed it tonight - I no longer get any power to the SaltCell, nothing on the screen and buttons don't respond. When I used the AquaLink app, it says there is no AquaPure SC found.
I took pictures of the old board and all connections, and was an easy 4-5 wire disconnect, swap boards and re-connect - but the salt cell is not receiving any power. Everything else seems to be working.
Any ideas or things to try? Plan for tomorrow is to go back thru all the troubleshooting steps and see if I can figure out why there is no power
I bought the used 2022 board off eBay and when I installed it tonight - I no longer get any power to the SaltCell, nothing on the screen and buttons don't respond. When I used the AquaLink app, it says there is no AquaPure SC found.
I took pictures of the old board and all connections, and was an easy 4-5 wire disconnect, swap boards and re-connect - but the salt cell is not receiving any power. Everything else seems to be working.
Any ideas or things to try? Plan for tomorrow is to go back thru all the troubleshooting steps and see if I can figure out why there is no power