I have 2 Jandy Laminar Deck jets as well as a bubble that were installed in my new pool about 10 months ago. The jets worked for awhile and then about 4 months ago one of the jets barely shot out anything and they other just produces a little stream. checked the filters, they are fine. I have a Jandy 1.65 variable speed pump for just the jets and bubbler seems to be working fine as the bubbler can produce a large spray. Any idea on how to start troubleshooting?
Jandy laminar jets not shooting as far as last year
- Thread starter Chisox44
- Start date
- Jul 21, 2013
- 65,408
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Hello,
Thank you for your reply. I noticed that I am missing the clear finger screen under the cap assembly. Could that be the issue? Does that have much of an effect on the jets?
Thank you for your reply. I noticed that I am missing the clear finger screen under the cap assembly. Could that be the issue? Does that have much of an effect on the jets?