I’ve searched for a thread reguarding this and have yet to find anything please help inform me if possible.
I have a Jandy Jxi 400 (will attached pictures) and everything was working perfect in the spring and now a few months later I used to AquaLink app and fired it up. Waited and waited and noticed I didn’t hear the thing it’s decently loud, no hot water etc etc I go look at the display board and it says off press pool or spa I did and nothing still.
Reset breakers and tried again nothing.
No faults I’m getting flow my valve turns when I enable spa mode etc so I’m getting non error codes have my psi and flow and not understanding this.
Called pool company to come out and review what may be the issue they found the issue and we’re going to order the part I’m like sweet it’s gonna be fixed.
Repair guy comes out and re diagnosed it and said this now. All parts are fine I jumped the “communication cable and it works” so of course I wasn’t home when he said he got it working and he left I called the company and got more details I thought but I didn’t they just said he jumped your remote wire and it works fine.
So me be somewhat mechanically inclined I look at the boards follow the two wires back to the AquaLink and they are in perfect condition I don’t know how they are the problem so I unscrew them from the Jandy Heater turn on breakers and try again and still nothing.
Would love to get this fixed myself vs them fixing it for $300 bucks for a wire that’s bad they say.
Thank you for your help guys.
I have a Jandy Jxi 400 (will attached pictures) and everything was working perfect in the spring and now a few months later I used to AquaLink app and fired it up. Waited and waited and noticed I didn’t hear the thing it’s decently loud, no hot water etc etc I go look at the display board and it says off press pool or spa I did and nothing still.
Reset breakers and tried again nothing.
No faults I’m getting flow my valve turns when I enable spa mode etc so I’m getting non error codes have my psi and flow and not understanding this.
Called pool company to come out and review what may be the issue they found the issue and we’re going to order the part I’m like sweet it’s gonna be fixed.
Repair guy comes out and re diagnosed it and said this now. All parts are fine I jumped the “communication cable and it works” so of course I wasn’t home when he said he got it working and he left I called the company and got more details I thought but I didn’t they just said he jumped your remote wire and it works fine.
So me be somewhat mechanically inclined I look at the boards follow the two wires back to the AquaLink and they are in perfect condition I don’t know how they are the problem so I unscrew them from the Jandy Heater turn on breakers and try again and still nothing.
Would love to get this fixed myself vs them fixing it for $300 bucks for a wire that’s bad they say.
Thank you for your help guys.
Attachments
-
D146C7E0-EE2F-4A83-B2D3-07CF46B0943C.jpeg385.5 KB · Views: 13
-
F462FB18-3DB9-449B-8227-21E6984CECFB.jpeg440.7 KB · Views: 13
-
16D4BB92-A5FE-4FCA-AF23-76BD91A3A531.jpeg398.3 KB · Views: 12
-
06766D63-128C-4BDC-915F-E18C6DD7EE89.jpeg468.8 KB · Views: 13
-
B8C71917-8BEF-41AC-B406-8C7E29A36CBE.jpeg522.4 KB · Views: 11
-
496566AE-D876-49A6-BE04-AD3C79BE7C8A.jpeg443.1 KB · Views: 10