Jandy epump offline (again)

[Oceansol]

I've posted about this several times over the years, but it's happening again.

I flipped the breakers, reset the controller, still nothing. I opened up the crontroller to see if there was anything causing a short, but couldn't find anything that looked wrong or out of place.

Everything's been fine for months and then suddenly this.

Ideas? Probably just going tocall a pool gut.... so tired of this recurring problem

 

[PoolGate]

I would check the connection between the controller and the pump. Run a continuity test on it with a multimeter.

 

[Oceansol]

Good idea. I'll check tomorrow

 

[Oceansol]

And then, of course, the next day everything ran fine. Literally nothing changed.

 

[dfwnoob]

I would confirm that the RS-485 serial connection (the 4 conductor wire) is secure on both the pump side and the Aqualink side. The side on the pump can sometimes become loose over time from the vibrations of the pump running.

 

[Oceansol]

Controller side is, but ill check the pump side today. Good suggestion, thanks