Jandy ePump-how to identify which "wet end" I have

Jeff S.

0
Silver Supporter
Aug 27, 2018
23
Mooresville, NC
Pool Size
16000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 1400
I have a Jandy ePump VSSHP220AUT which has developed a pronounced squeal/raspy squeal which seems to be coming from the motor (although it's hard to tell for sure). I researched and believe I can replace the existing Century motor with an EvoGreen EVQ225 that will communicate with my iAqualink. However, apparently some of the wet end parts should be replaced when the motor is swapped (mostly orings). But I don't know how to tell which pump I've got. there's nothing on the outside of the unit to indicate which pump. I guess it's either a SHPF, SHPM or a FHP. I'm not able to figure this out and would appreciate any help.

Thank you.
 
1733242910870.png

Motor, Variable Speed, Regal Beloit Motor VSSHP270 R0562200
1 Motor, Variable Speed, Regal Beloit Motor VSSHP220 R0562201
2 Backplate, Pump, SHP, PHP/MHP All R0445200
3 Impeller Replacement Kit VSSHP270 R0807200
3 Impeller Replacement Kit VSSHP220 R0807201
4 Diffuser with O-ring and Hardware All R0445400
5 Mechanical Seals (Carbon and Ceramic) All R0479400
6 Body, Pump All R0445601
7 Motor Mounting Foot Assembly, SHP All R0445700
8 Locking Ring (With Lid and O-ring) All R0445800
9 Filter Basket All R0445900
10 Plug, Drain (Set of 2) All R0446000
11 Tail Piece (2" by 2½") with Union Nut and O-ring (Set of 2) All R0446101
12 Seal, Lid All R0446200
13 Blue Pressure Test O-ring All R0479000
14 O-ring, Backplate All R0446300
15 O-ring, Tail Piece (Set of 2) All R0446400
16 Diffuser/Impeller Hardware Set All R0446500
17 Backplate Hardware with Set of 8 Bolts and Washers All R0446600
18 Motor Hardware with Set of 4 Bolts and Washers All R0446700
19 Screws, Motor Mounting Foot (Set of 2) All R0446800
20 Cover, Speed Drive (With Hardware), ePump, Regal Beloit Motor Regal Beloit Motor R0562300
21 Cover, Fan, 1-3 HP, ePump Replacement Kit, Regal Beloit Motor Regal Beloit Motor R0562400
22 Hardware Speed Drive, ePump, Regal Beloit Motor Regal Beloit Motor R0562500
23 Connector, Speed Drive, ePump (4-Pin Connector) (Not Shown) All R0660900
24 Data Cable Bulkhead Fitting All R0501100
25 Screw, Electrical Box (Set of 2) Regal Beloit Motor R0562600
26 Screw with O-ring, Self-Sealing All R0515400
27 Cable, RS485, Replacement Kit All R0535100

https://cdn.fluidrausa.com/-/media/zodiac/global/downloads/jandy/pumps/h0311700_reve.pdf
 

SKU #VSSHP220AUT



 

Attachments

  • Stealth Pumps.pdf
    2.4 MB · Views: 1
TFP is a registered 501(c)3 non-profit that is maintained by user donations.

All of our content is free of advertisements.

Please consider donating at:

 
The first attachment you sent me has all the info I need. What gets confusing is that the term "pump" is used for the entire motor/pump assembly and then separately just for the pump. It looks like Jandy used to call its full assemblies a Stealth Pump and then when the variable speed models were offered the wet end is the same, just the motor changed.
 
  • Like
Reactions: JamesW
TFP is a registered 501(c)3 non-profit that is maintained by user donations.

All of our content is free of advertisements.

Please consider donating at:

Happy to donate. The donate button on the home page just returns me to the home page, however.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.