Jandy Aquapure 1400 'HH' when pressing temperature, '--' when pressing salinity

May 31, 2012
19
Hi, I hope someone can recommend a solution. My Jandy Aquapure 1400 has recently stopped working. When I press the salinity button, it gives me a "--" reading, when I press temperature it displays "HH". I tried another sensor and it didn't make any difference. The cell is probably about 3 years old. Salt is at about 3400 with strips.

I've read that you can calibrate the salinity sensor when you get this error from the salinity button but I haven't seen any solution from when you get it from the temperature button.

Any suggestions?

Let me know. Thanks,
Mike
 
Ignore the message, I found another sensor to try (I'm a pack rat and have a bunch of old ones lying around and it works now - I should probably order a new one (just didn't want to do it before I confirmed that was actually the problem)).
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.