Jandy Aqualink PDA

[maropers]

My PDA just started acting up.

I turn it on, the screen shows it connecting, It connects but then the screen goes blank - the screen is still lit but there are no menu items that show up. Is there a reset for the unit or will I be spending money on repairs.

I've recently replaced the PCB for the salt cell, and the PDA worked after that install for appx a week.

 

[HermanTX]

My PDA just started acting up.

I turn it on, the screen shows it connecting, It connects but then the screen goes blank - the screen is still lit but there are no menu items that show up. Is there a reset for the unit or will I be spending money on repairs.

I've recently replaced the PCB for the salt cell, and the PDA worked after that install for appx a week.

The PDA is run by batteries. Have you checked those?

You can also switch off the whole system by turning off the power to your AquaLink box. Wait a minute and then turn on. Let it reboot and see if that helps.

 

[maropers]

Yep fresh batteries.

I'll give it the old widows fix-all and reboot the system - I'll report back once that is done

THANKS!!