Jandy 2HP VS Stealth Not Turning On

[mig1980]

Good day. We have a Jandy 2HP VS Stealth that I estimate is about 12 years old. Yesterday I noticed that it did not turn on via the Jandy automation system we have installed.

After checking, power is reaching the motor and I can hear clicking both form the pool equipment subpanel as well of the pump motor but it will not turn on.

I did turn on briefly (20 minutes) this morning during the scheduled time but it turned off.

I wanted to ask if it would be worthwhile replacing just the motor or if I should be looking at replacing the whole pump?

If the motor only, what parts would I need?

If the whole pump, what would be the recommendations?

 

[ajw22]

Let's see if @1poolman1 thinks a motor replacement makes sense.

 

[1poolman1]

Let's see if @1poolman1 thinks a motor replacement makes sense.

Don't know of a 2.7THP motor that is compatible with a Jandy controller. Given the age of the pump, the Jandy of that era may not be able to control a Pentair VSP either. Probably new Jandy pump time.