Jacuzzi NAtrium 25 Flow Switch

[Alex954]

Greetings all,

Being new to the forum I am reaching out in the hope to get a better answer.
My saltwater system continues to read a No flow error, I have purchased an after-market flow switch and it continues to read No flow, I recently replaced the pump and have cleaned out the cell.
I am hoping someone could point me in the right direction to buying a flow switch that would work for that system or input on what it possibly it can be.
Another concern was if the system reads no flow, does the system still produce salt in the pool.

thank you all in advance for your suggestions.

 

[mknauss]

Welcome to the forum!
To answer your last question, if the system is sensing No Flow, it should NOT be producing chlorine -- that is a safety feature to keep the cell from exploding.
As far as a flow switch, post a picture of the flow switch. It appears to me the system is a Hayward knock off, as Jacuzzi does not manufacture anything just puts its label on things.
I suggest you read ABC's of Pool Water Chemistry