Is this pump fixable?

[Geoffv]

Hi All,
Re Hayward MaxFlo VS SP2302VSP
While undoing bolts to replace seals, the pump-end housing on the motor with the bolt holes where the seal plate is bolted broke. The metal that makes one of the bolt holes crumbled. See the photo and diagram.


I can't find a part number anywhere -- it is essentially the motor housing at the pump end of the motor.
Anyone know if this part can be found? Hayward call centre was no help at all.
Or should I hurry up and get a new pump before everyone is sold out?

Thanks,
Geoff
Ottawa, ON

 

[JamesW]

Can you show the motor label?

 

[JamesW]

It is probably a Century motor end bell.

Verify with Century for the correct part.

You will also probably need to replace the front bearing.

A.O. Smith A O Smith Shaft End Bell, Sq.flange (203)- SAW-49 - INYOPools.com

SAW-49 - END BELL, SQ.FLANGE (203) (SAW-49)

www.inyopools.com

Amazon.com

 

[JamesW]

Check with a local electric motor shop and have them replace the front end bell and bearing.

Verify correct part number with Century.

Century Endbell - 1011107-001

Electric Motors by Fasco, Century, Baldor, Marathon, Rotom and U.S. Motors

emotorpro.com

1500284 Used Century FRONT End-bell from USQ series motors, 6203 bearing pocket | eBay

This is to insure that we can file a claim with the carrier when applicable.

www.ebay.com

Century®

Century brings cutting edge, high quality and energy efficient solutions to customers all over the world. Century electric motors power pool and spa pumps, residential and commercial Heating Ventilation and Air Conditioning systems and more.

www.regalrexnord.com

https://www.regalrexnord.com/brands/century/contact

 

[Geoffv]

Wow - thanks for the input! Heading to a pump store at lunch tomorrow. Here's the motor label.
Thanks again,
Geoff

 

[JamesW]

Contact the manufacturer to see what the part is.

[email protected]

Go to a local electric motor shop to see if they can fix it.

 

[JamesW]

Contact | HANNING ELEKTRO-WERKE GmbH & Co. KG

HANNING ELEKTRO-WERKE. On this page you will find all contact details. Learn more now.

www.hanning-hew.com

 

[Geoffv]

Perfect - thanks!
Geoff

 

[1poolman1]

Hi All,
Re Hayward MaxFlo VS SP2302VSP
While undoing bolts to replace seals, the pump-end housing on the motor with the bolt holes where the seal plate is bolted broke. The metal that makes one of the bolt holes crumbled. See the photo and diagram.
View attachment 566602 View attachment 566603

I can't find a part number anywhere -- it is essentially the motor housing at the pump end of the motor.
Anyone know if this part can be found? Hayward call centre was no help at all.
Or should I hurry up and get a new pump before everyone is sold out?

Thanks,
Geoff
Ottawa, ON

Century EVO EVQ165. Nidec Neptune NPTQ165. Both motors will bolt to that pump. Century will allow you to use your existing time clock. Neptune has it all built in.