Is my pool saveable? (Pics attached)

Cravi5

Bronze Supporter
May 7, 2020
33
Nj
Hi.

We just moved into a new home with a 16’x32’ oval above ground pool. It is decked in. We have to replace the liner, and I’m a little concerned.

1) the track the liner attached to appears to be poking the liner. This is at the joints, they are not flush. Is this fixable or does the entire track need to be replaced?

2) more concerning, you can see I the pics the imprint of the uprights through the liner. I assume this is not usual, but is it fixable? Once drained, will I be able to just adjust the uprights and push backwards so the liner will not be push up against the uprights? You can see that the liner is wavy now where the posts are.
0D5FF85A-9364-4DD5-9FA1-053DFB9A629F.jpegFFC3D2BC-E703-4CC0-9105-5B7E936AB4FE.jpeg
 
This is the way oval pools are made. You will always see the long walls bow like that.
 
  • Like
Reactions: Cravi5
Oval pools have those waves in the straight run. Mine is not as pronounced as that but we also have a newer buttress free pool so maybe that makes a difference? If you look in this pic you can see the left side is not straight by the shadows.19143920_10155411216487813_3879527804782342502_o.jpg
 
  • Like
Reactions: Cravi5
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.