So, yesterday my FC level was about 2.6ppm. I added about 3/4 gallon of 8.25% bleach (trying to get it up to around 5ppm). About 24 hours later, FC is 0. I typically supplement my bleach with tablets in a floater (in case I forget to test one day). I had 2 tablets in the floater during this time, but FC still dropped to 0??? The tablets don't seem to do anything for me. Could it be due to low stabilizer?
I had high CYA before Harvey, but now it seems on the low end. I tested it with my Taylor test kit yesterday and came up with about 30ppm (but I am a little unsure of my reading). Double checked with a test strip and now I'm more confused. Doesn't seem to match either color.
Other readings from today:
PH - 7.6
TA - 80
CH - 230
I had high CYA before Harvey, but now it seems on the low end. I tested it with my Taylor test kit yesterday and came up with about 30ppm (but I am a little unsure of my reading). Double checked with a test strip and now I'm more confused. Doesn't seem to match either color.
Other readings from today:
PH - 7.6
TA - 80
CH - 230