Intelliconnect relays

[Jjehnzen]

Ok...my relay has a line 1 load 1 line 2 load 2. My equipment has a hot, neutral, and green (black white green) what goes where?

 

[Jimrahbe]

J,

Tell us what it is you are connecting to relay number 1?

Tell us what it is you are connecting to relay number 2?

Before I tell you what to connect to where I want to make sure I understand what you are doing.

Thanks,

Jim R.

 

[Jjehnzen]

Relay 1 is the pump. Relay 2 is an LED light.

 

[Jimrahbe]

J,

What specific pump? Single-Speed, 2-speed or VS? What voltage is the pump designed to run on, 240 VAC or 120 VAC??

Will the lights get 120 VAC directly, or will there be a step-down transformer between the IntelliConnect and the LED light?

The more you tell me the sooner we can get this done...

Thanks,

Jim R.

 

[Jjehnzen]

J,

What specific pump? Single-Speed, 2-speed or VS? What voltage is the pump designed to run on, 240 VAC or 120 VAC??

Will the lights get 120 VAC directly, or will there be a step-down transformer between the IntelliConnect and the LED light?

The more you tell me the sooner we can get this done...

Thanks,

Jim R.

2 HP Excel Professional Grade Pool Pump (1* H01112PG)
:
Light - 120 VOLT COLORLOGIC LED LIGHT WITH 50' CORD AND NICHE (1* H02540CL, 1* H00382)

 

[Jjehnzen]

2 HP Excel Professional Grade Pool Pump (1* H01112PG)
:
Light - 120 VOLT COLORLOGIC LED LIGHT WITH 50' CORD AND NICHE (1* H02540CL, 1* H00382)

The light and pump will be wired directly

 

[Jjehnzen]

I am thinking the two lines connect to the panel for power and the two loads are from the device. Cap grounds?