Intellichor lights question

[96gtrlm]

So, I can find what these alternating lights every 10 seconds between Cell and Flow mean. Flow light starts red, then goes green and then cell light goes green. Anyone?

 

[mknauss]

The first picture the flow switch was not closed. Then it closed due to higher flow. The third picture indicates the cell is generating chlorine.

 

[Jimrahbe]

96,

The cell light will never come on if the flow light is red..

I "assume" that your flow is too low and that turns the flow light red.. then the flow increase enough to close the flow switch and the flow light turns green. When the flow light turns green, it allows the cell light to turn on..

The only thing I can think that would do that is a stuck weir door on the skimmer..

Thanks

Jim R.

 

[96gtrlm]

Every 10 seconds these light rotate. Red flow, green flow, green cell. Even at 3450 rpms from the pump. Skimmer clean and filter clean.

 

[Jimrahbe]

96,

So not random.. Continually happens every 10 seconds.. Odd.. I have never seen that before.

I can only assume the cell is bad or maybe stuck in some kind of self test loop...

How old is the cell?

I assume you have turned it on and off and it still has the same issue???

Sorry, but I am not help on this one.

Thanks,

Jim R.

 

[96gtrlm]

5 years used 5 months a year

 

[mknauss]

Is the cell connected to Pentair automation?

 

[96gtrlm]

Is the cell connected to Pentair automation?

No

 

[96gtrlm]

Odd, but now it’s working just fine. All green lights at 1450 rpms. Would still like to know what that light combination was about, but I’ll take all green lights!

 

[mknauss]

I wonder if the flow was just on the edge. Might want to increase the flow by 50-100 rpm.

 

[JamesW]

What is the date from the bottom of the cell?

Maybe needs a new flow switch or maybe it's a failing cell.