Intellichlor IC-40 Sani Output Lights flashing (Low Output Mode)

[myrtlebeachmike]

We recently purchased a Solar blanket to raise the pool temp. I didn't realize the Chlorine output would elevate due to the lack of evap and when the reading got so high I temporaily shut off the SWG. When I turned it back on the Sani Output lights started flashing instead of being constant. The Chlorine output is keeping up somewhat but now Im wondering how to get out of Low output mode and back into Normal mode or or if I have damaged it somehow. It has only been 10 months since the installation.

Thanks for Helping out!

 

[Jimrahbe]

Mike,

Seems to me you just need to keep pressing the "More" button.. When you get to a blinking 10% it should then go to a solid 20% etc..

Thanks,

Jim R.

 

[myrtlebeachmike]

Mike,

Seems to me you just need to keep pressing the "More" button.. When you get to a blinking 10% it should then go to a solid 20% etc..

Thanks,

Jim R.

YES! OK got it! Sometimes it is sthe simpliest fix. Thanks so much!