In the Pentair App, when I look under devices, I see the 8am-8pm schedule for my pump and 9:30-midnight for my light, but neither schedule is working. When I go to the Schedules tab, it says I have no schedules. I can control the pump and light from the device tab, so it's definitely connected. What am I doing wrong?
Intellicenter Schedules Not Running
- Thread starter RED3
- Start date
Red,
I use my PC to control my EasyTouch, so don't fully understand your issue.. You don't schedule a "device" you schedule a Circuit.
But, try this..
Go into your schedules and set up the POOL circuit from 8 am until 8 pm and save it and see what happens.
Do the same for whatever Circuit controls your pool light... (It will be an Aux circuit)
Sorry, I did not see that you had the IntelliCenter. Should still be the same basic idea, but not sure how the IntelliCenter screens work.
Thanks,
Jim R.
But, try this..
Go into your schedules and set up the POOL circuit from 8 am until 8 pm and save it and see what happens.
Do the same for whatever Circuit controls your pool light... (It will be an Aux circuit)
Sorry, I did not see that you had the IntelliCenter. Should still be the same basic idea, but not sure how the IntelliCenter screens work.
Thanks,
Jim R.
@RED3
From the home screen of the app.... When you scroll down to the botton, you don't see the Schedules selection as pictured below?
If so, are you tapping it?
r.
From the home screen of the app.... When you scroll down to the botton, you don't see the Schedules selection as pictured below?
If so, are you tapping it?
r.