Intellicenter Automation Help Needed

[Stradt03]

Hi all,

I just did some pool renovations and upgraded my easytouch to an intellicenter. Seems to be much more functionality within the Intellicenter compared to the easytouch.

I have added the expansion card to the intellicenter to include additional valve control ports. I currently have 4 intellivalve actuators, (1) for bubbler supply, (1) for deck jets, and (2) for waterfall operation. The waterfall and the 2-intellivalves were added as part of the recent renovation. I have figured out how to automate the bubbler and deck jet intellivalves within the intellicenter.

My question is this, how do I program the two new intellivalve actuators to fire (one to open, one to close) at the same time when I select the Waterfall feature.

What other cool features does the intellicenter have that I was missing out on with the easytouch?

Thanks!

 

[ajw22]

My question is this, how do I program the two new intellivalve actuators to fire (one to open, one to close) at the same time when I select the Waterfall feature.

Welcome to TFP.

Assign both actuators to your water feature circuit.

Show me this page on your system through intellicenter2 . com

 

[Stradt03]

Welcome to TFP.

Assign both actuators to your water feature circuit.

Show me this page on your system through intellicenter2 . com

View attachment 641828

Hi Allen, Looks like my valve expansion card may be bad. The intellivalves get no power when connected to the card, but do get power when connected to the integrated valve ports on the intellicenter. As soon as I get the card swapped out, I will come back with the requested screenshot.

 

[ajw22]

Make sure that the expansion card is fully seated on the connector to the main card.

 

[Stradt03]

Make sure that the expansion card is fully seated on the connector to the main card.

Yep, I removed and reseated it with same result. Confirmed with tech support that the card is bad. Replacement is on the way.