Hello. I have a Pentair Control Panel and 4 Intellibrite lights installed. They worked fine for a few months and then one died. Over the past 2 months I have had 2 additional lights no longer working. I'm down to one functioning light. Looking for ideas as to what might be the cause. I was guessing that it might be a programming issue? Any ideas or suggestions. Thanks in advance for any ideas. I'm in the process of waiting for a service appointment.
Intellibrite Lights have stopped working (one after the other) new pool
- Thread starter hstarlin
- Start date
- Jul 21, 2013
- 52,671
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Do you have a multimeter and know how to use it?
If so check you have power to the lights.
If you have power to the lights then you have a warranty issue with Pentair.
Do you have a multimeter and know how to use it?
If so check you have power to the lights.
If you have power to the lights then you have a warranty issue with Pentair.
