Hi,
I'm battling a low (to no) FC level in my pool. After a party, I turned the IC20 to "full output". This didn't help bring the FC up, so I ran it again the next day. Since then, the IC20 is stuck on full output and hasn't stopped (But I also don't think it's producing any chlorine since my levels are still extremely low, even after manually adding liquid chlorine)
Has anyone seen this problem with the IC20? I have the pool builder coming out on Wednesday but thought I'd post the question to the group. I've even tried powering off the breaker and powering back on again.
Thanks!
Latest test results (Pool store results, still waiting on TF Kit)
FC - 1.73
TC - 2.15
CC - 0.42
PH - 7.4
Hardness - 178PPM
Alkalinity - 105PPM
CA - 36PPM
Copper - 0PPM
Iron - 0PPM
Phosphate - 3980PPB
Salt - 3800
I've added almost 2 gallons of liquid chlorine today trying to bring to shock level, and bringing the water for testing to the pool store daily until my kit comes in.
I'm battling a low (to no) FC level in my pool. After a party, I turned the IC20 to "full output". This didn't help bring the FC up, so I ran it again the next day. Since then, the IC20 is stuck on full output and hasn't stopped (But I also don't think it's producing any chlorine since my levels are still extremely low, even after manually adding liquid chlorine)
Has anyone seen this problem with the IC20? I have the pool builder coming out on Wednesday but thought I'd post the question to the group. I've even tried powering off the breaker and powering back on again.
Thanks!
Latest test results (Pool store results, still waiting on TF Kit)
FC - 1.73
TC - 2.15
CC - 0.42
PH - 7.4
Hardness - 178PPM
Alkalinity - 105PPM
CA - 36PPM
Copper - 0PPM
Iron - 0PPM
Phosphate - 3980PPB
Salt - 3800
I've added almost 2 gallons of liquid chlorine today trying to bring to shock level, and bringing the water for testing to the pool store daily until my kit comes in.