- Sep 19, 2018
- 98
- Pool Size
- 14000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
EDITS:
- This blog post about Simulating "inching" with NodeRed
Hi there!
I continue to build my pool automation into Home Assistant. I'm currently working on the valve actuators and found this interesting thread about Automating Valves at will:
www.troublefreepool.com
However, that's all done using WIFI. Does anyone have idea of how to do the same but using Ethernet? Open to adding a PI into the mix or Arduino or ESP32 to the mix, as necessary.
Here's one similar product but I don't think it has the "inching" feature (newbie here).
Haven't yet bought my Valve actuators. Researching but found nothing about quality so I guess I'll go with the Intermatic ones at about $120 a pop.
New year, new promises that we'll be finishing our pool automation
- This blog post about Simulating "inching" with NodeRed
Hi there!
I continue to build my pool automation into Home Assistant. I'm currently working on the valve actuators and found this interesting thread about Automating Valves at will:
Finally installed home made automation to include variable position valve control.
Just thought I would share this in case anyone is looking for home made variable valve positioning. My prior valve control was just 2 wall switches to control waterfall -> IFCS and skimmer -> mian drain Valves. That can be seen here...
www.troublefreepool.com
However, that's all done using WIFI. Does anyone have idea of how to do the same but using Ethernet? Open to adding a PI into the mix or Arduino or ESP32 to the mix, as necessary.
Here's one similar product but I don't think it has the "inching" feature (newbie here).
Haven't yet bought my Valve actuators. Researching but found nothing about quality so I guess I'll go with the Intermatic ones at about $120 a pop.
New year, new promises that we'll be finishing our pool automation
Last edited: