Impressed with the results of adding DE to my sand filter

Apr 25, 2017
222
Greensboro, NC
After reading about adding DE to a sand filter to improve filtration, I decided to try it. Thanks to TFPC my pool has always been crystal clear (looks like air) but I did notice some small 'specks' floating in the water at night in the glow of the pool light. You wouldn't really notice them during the day but I wanted to see what would happen.

I slowly added DE last night, enough to raise the pressure from 16psi to 17psi; it took 3 cups of DE.

After getting up this morning, my filter was at 19psi. I checked it again after work this evening and it was at 20.5psi, so I went ahead and backwashed it (and it's back to the 15-16psi range).

After turning on the pool light, I'm amazed at how clear my water is. Like I said, my water has always been sparkling like a crystal, but you can actually tell a slight difference with the light on at night.

I'd get a photo for comparison but no camera out there will adequately capture the difference. Oh well.

Give it a go if you get a chance. I was impressed. :cool: $25 for 25lbs of DE from my local pool store...*shudder*...only time I've ever gone in there other than needing an o-ring. :eek:
 
So far, I’m liking initial results of De in my sand filter, too

And FYI to others, in case you want to avoid a pool store, my Walmart (so I assume others) sell 10lbs of HTH DE “Filter Aid” for $9.88, but I wound up getting the 25lb at a BigR for $16
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.